Floor laminate machine / Hot press for making laminated flooring

Descriptions   1. Short Cycle Hot Press used for flooring lamination, by overlaying wearable layer, decorative material, HDF panels and balance paper.   2. Substrate: HDF , standard sizes : 1220* 2440 , 1830 * 2440, 1830* 2750 mm,      Decorative material: Melamine paper.   3. Models vary with the surface textures changes from 1800T to 2800T.      Applied Floor Type   A type: Flat & light emboss Laminate Flooring (Such as glossy, matt, wood grain)       B type: Heavy emboss laminate flooring (Such as EIR, V-shape, Wave, Hand scratch design)       Main technical parameters  

Model     Size( ft )		Nominal pressure (KN)	End panel size (mm)	Max pressure of work piece (kg/cm2)	Main oil cylinder (diameter x pcs)
YX900	4x8	9000	1220 x 2440	30.2	φ280 x 6
YX1200	4x8	12000	1220 x 2440	40.3	φ320 x 6
YX1400	4x8	14000	1220 x 2440	47	φ340 x 6
	5x8	14000	1550 x 2440	37	φ340 x 6
	6x8	14000	1830 x 2440	31.3	φ340 x 6
YX1600	4x8	16000	1220 x 2440	30.2	φ320 x 8
	6x8	16000	1830 x 2440	35.8	φ320 x 8
	6x9	16000	1830 x 2750	31.7	φ320 x 8
	7x9	16000	2100 x 2750	27.7	φ320 x 8

      Working Flow of Whole Laminate Flooring Production Line   1. Boiler: It is used to provide necessary heat for the production process.
2. Hot press machine: The abrasion resistant overlay, decorative paper and balance sheet are pressed onto the HDF base board by this machine to form the floor board, and this operation is conducted at high temperature and high pressure. Moreover, all kinds of beautiful patterns can be created on the boards with the help of the Stainless Steel Press Plate.
3. Floor cooling line: Large floor boards are cooled down quickly, and their edges are trimmed.
4. Cutter: It cuts a large floor board into two halves in the transverse direction.
5. DET grooving machine: It further cuts the board into many smaller parts, and the final size should be in accordance with customer’s requirements.
6. Waxing line: The milling machine makes grooves, namely clicks, around the floor board for installation.
7. Packing line: It overlays a plastic film on the outer side of the packages.   Main feature   1. Control system:  PLC control with connection to computer  (Mitsubishi, Omron, Siemens optional), from infeed to storage, complete lamination offered. This system is stable and is of high automation. Technical parameters can be set, modified and monitored by human-machine interface.

2. Mechanical system : Stable, easy to operate, high efficient and easy for maintenance.

3. Hydraulic system: Top branded valves and pumps are used for this system, with features of high stability, low noise, and no leakage.      For more details, please feel free to contact with me!     

Contact us if you need more details on Hot Press for Making Laminated Flooring. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Floor Laminate Machine、Hot Press for Making Laminated Flooring. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Short Cycle Hot Press Line > Laminate Flooring