This equipment is the ideal equipment for wax mould sand hanging in investment casting industry, its structure is simple and practical, the working area is spacious, the amount of sand pouring is very even and can be adjusted, the operation is simple, comfortable, the work efficiency is remarkable, it is one of the key equipment to ensure the high quality of casting, it is very suitable for the continuous use of housing manipulator.
2.The transmission system
Transmission route: motor→ reducer→ roller→ sand→ bucket
3. Use, adjustment and maintenance of equipment
3.1.After the equipment is connected to the power supply, turn on the power switch and start the drum motor, then the drum rotates, and observe whether the rotation direction is correct. If it is reversed, please adjust the inverter to output the terminal phase sequence.
·Total air switch: mainly responsible for the whole power on and off and leakage protection function.
·Axial flow fan: when the power is started, the fan turns to cool down the control box.
Fuse: mainly responsible for controlling the safety effect of circuit short circuit and disconnect (note: no more than 2A)
·Ac contactor: the contactor starts to work when the panel drum is pressed down. It is mainly responsible for the power supply cut off of the inverter.
·Frequency converter: the speed of the drum is adjusted by this knob. Meanwhile, the vibration motor can synchronize with the speed of the drum. It is not easy to rotate at high speed.
(Note: The internal parameters shall not be modified at will, which may cause damage to the equipment)
·Power indicator: When the control power is on, the light will light up, indicating that the power is on. It can be started at any time.
·Drum start button: press the start button when it is needed to work, and the drum will rotate and run. The green light will be on at the same time (Note: when supporting the shell making manipulator, the drum start or stop is controlled by the manipulator control box).
·Power switch: when the whole control circuit is switched on, the power indicator lights up at the same time.
·Drum stop: when the sand spraying work is completed, press this button and the drum will stop rotating (note: when supporting the shell making manipulator, the drum will start or stop by the manipulator control box)
3.2.The sand is slowly poured into the working mouth, and the roller rotates the sand and lifts it to the sand drenching machine through the sand hopper, and then leaks out from the upper upper screen board. After the motor vibrates, the rain drenching effect can be achieved and the sand hanging work can be operated.
Vibrate motor: This vibrates and passes to a sieve so that the sand can be left behind quickly for best rain effect.
3.3.Due to frequent vibration, please check the tightness of the gear of the rear reduction gear of the equipment every six months, as well as whether the position of the support frame moves, and adjust it.
Packed with steel structure and MDF to ensure the safety of equipment during transportation.
Q1: How long can it be delivered after the order is placed?
Most of our machines are customize ordered, they can be delivered within 30-60 days after the order is placed;
Q2:How can I pay for the money for the machine.
We accept 30% as a deposit and the balance need to be paid by T/T before the machine shipping out.
Q3: What should I do if I find quality problems in the process of using my product?
In case of quality problems, if you need after-sales service, you can contact us through wechat / whatsapp: for communication and solution; our engineers provide 24-hour online guidance to solve the problems.
If you need to replace the parts, we will provide them to you in the first time through international express after paid.
Q4: Can I choose to buy equipment through Made-In-China company?
If you buy our products for the first time, we will fully cooperate with your choice, and you can buy them in any way.
Q5: Does the machine have an English manual and warranty card?
Each machine has a professional English operation manual. The warranty period of our machine is one year, except for human factors or wearing parts.
In addition, we can provide electronic version of the English manual.
Q6: The delivery time of products without stock is too long for 30-60 days.
First of all, we will speed production to meet your needs.
In addition, the long delivery time is because our technicians need to carefully check and debug the equipment to ensure the quality of the machine.
Q7: What if I choose the wrong machine?
We have pre-sales engineers with rich professional knowledge. According to your products, we provide the most suitable machines and solutions. Before placing an order, we make sure you don't choose the wrong machine. If it happen, we will solve the problem with you.
Q8: Who is responsible for the installation and debugging of the machine I purchased?
We the seller are fully responsible to send our engineers within two weeks from the date of the containers arrival to the buyers factory to commissioning the machine and training the staff of the buyer, the buyer should be responsible for a round trip economy ticket, a hotel and any other necessary accommodations for the seller's engineers.
We are the professional company in the market of lost wax casting equipment. After 30 years of development, we have corresponding equipment in all process of lost wax casting.
First of all, we have Wax Injection. To meet the needs of different clients, we invest two types, Double Station Wax Injection and C type wax injection. Then in shell making process, we have patent product, 3&4 arms Shell Making Robot with Drum Sanding Machine, slurry dripping machine. After that, we have Swing Type Dewaxing Kettle, shell roasting furnace. In metal pouring process, we have Pouring Robot. To reduce noise during shelling process, we have Shelling Press Machine.