new condition high quality plywood MDF HDF furniture board laminating hot press

Product Description funiture laminates short cycle single/double hot press machine Part 1: Founctions The short cycle press machine is for laminating melamine paper / phenolic film / veneer on particle board / MDF / HDF / plywood. The laminates could have all kinds of surface texture such as glossy, mirror, matt, suede, snow, woodgrain, and EIR board. As indicated by its name, the double sides hot press machine is primarily applied for wood based panels such as partical boards, MDF, HDF, plywood, and it finishes hot forming process on the two sides at one time. The oil cylinder is placed at the upper end, while a board infeed conveyor is also supplied. This model has the highest production efficiency among similar products provided by us, and it is one of the most commonly used presses on the market now. The double side hot press is mainly designed for wood panels with thickness of 6mm or more. It fits for the production of decorative panels with different kinds of surface, such as glossy, matt, pitted, embossed, synchronous, etc. Part 2: Equipment list of standard machine     Main parts are imported from Japan Mitsubishi, German Siemens, France Schneider,  Taiwan and China top brand.   Part 3: machine model
Part 4:Accessories Certifications
  Company Information   QT-QualiTech Press Machine Factory was inaugurated in 2003 within Wuxi city near Shanghai. We have built a solid reputation over 13 years of groundwork and over 180 units of QT lines are using by our honored customers from Iran, Turkey, Canada, Mexico, Venezuela, India, Egypt, Uzbekistan, Kazakhstan.,etc We are a prominent Chinese manufacturer that specializes in the development, production, and distribution of Wood Based Panel Machinery. Our most popular products consist of the semi auto & fully auto Short Cycle Hot Press Line, the Paper Impregnation Line, PUR Hot Melt Glue Press Line and UV glossy coating line. The hot press line could be applied in Laminate Flooring, multi-layer hot press for door skin, as well as single-side and double-side hot press for the furniture board. Additionally, we can provide the molding press for both door profiles and wood pallets. Our professional technicians can travel overseas to assist you with on-site installation and calibration while going over critical operating guidelines.
Exhibition&customers Exhibitions& Our customers We go to exhibition such as Indiawood, woodmachinery in Istanbul, Guangdong Interzum,  Vietnam wood etc and visit customers every year. We change opinions with our customers, collect  the newest  industry informations so that we can provide competitive products and service, keep growing all the time.
  Packaging & Shipping Packaging&Shipping The machine body is fastened by steel wire rope whose diameter is 16mm, while all the movable components are fixed by fumigated wooden pallets. In this way, all the parts inside the container will be will keep still.
  FAQ 1. Is the hot press suitable for my factory?
Please make sure that your product is laminate flooring, decorative melamine board, or moulded melamine door skins. 2. How much working pressure shall the hot press offer?
This depends on the density of wood board and the depth of surface texture.
a. For common glossy, matt or suede mat board, 900~1200T is enough.
b. For low embossed texture, 1200~1600T will be fine.
c. For deep embossed texture, 1400~2000T is necessary.
d. For V-groove, the working pressure shall be over 2400T. 3. I have heard of single side and double side hot press. What are they and what are the differences?
A single side hot press laminate paper or other materials onto one side of the substrate at one time, and it suits for furniture boards, especially thin boards. However, it is applicable for double side laminated board as well, because the other side of the board could be processed through another pressing operation. The double side type is able to press two sides of the board at the same time, thus greatly improving the production efficiency. It is commonly used to manufacture laminate flooring. 4. Do I need a single-layer hot press or a multi-layer hot press?
The closing time for single-layer type is short, while it is relatively longer for the multi-layer type. You should select hot press according to your manufacturing technique. For furniture board or flooring, the single-layer type is better. For door skin, the multi-layer type is more practical. On the other hand, the single-layer type is cheaper, and it can be incorporated into a production line more easily. Usually, board infeed and outfeed conveyors are not equipped to the multi-layer type, because they are pretty expensive. 5. Is my product of standard size?
The standard size refers to 4×8 feet, 6×8 feet, 6×9 feet, 7×9 feet and 6×12 feet. Other dimensions are not standard. 6. For laminate board production, how much area shall my factory take up?
The pressing machine needs a 1000-square meter-large place for installation at least, and extra room is required to stack boilers and end products. Contacts      Related products Auto short cycle laminating line         Floor hot press machine Door skin press machine                        PUR hot melt glue press line

Contact us if you need more details on Laminate Hot Press. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wood Laminating Press、Short Cycle Press Mechine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Short Cycle Hot Press Line > Melamine Laminate